Issue link: https://viewer.e-digitaledition.com/i/1432094
Part 1 of a 2-Part Series on Carbon Fiber Research at Universities in the U.S. By Kathlyn Swantko or the past 50 years, carbon fiber has been viewed as a dream material. Today's focus is solving high costs of raw materials; fabrica- tion/ manufacturing; oxidation/flammability issues when exposed to high-temperatures; and its non-recyclable/non-sustainability issues, which is expected to help drive an annual growth rate of +12 percent through 2024. Here's a look at three universities con- ducting advanced research in carbon fiber reinforced polymers and composites. University of South Alabama (USA) USA has a National Science Foundation Partners for Innovation grant to make next generation, high-performance carbon fiber reinforced polymer (CFRP) composites for broader commercialization. USA's research has resulted in notable improvements in CFRP properties for better multifunctional performance tailored for specific applications. The key to USA's proj- ect is the use of strong, highly conductive carbon nanofibers (CNFs) placed in multiple collections forming a zig-zag pattern. (USA's ZT-CFRP research means the z-orientation/ thickness direction of the composite laminate panel creates an interlocked, multi-scale fiber-reinforced network.) The patented technology was developed at the University by mechanical engineering professor, Dr. Kuang-Ting Hsiao. "If this concept is implemented, we can expect that airplanes, cars, and sporting goods made with ZT-CFRP will be more efficient, lower production costs, be easier to design and assemble, and will create a lighter and stronger product," explains Hsiao. University of Nebraska-Lincoln Together with the Institute of Condensed Matter Chemistry of Bordeaux, France, the University has developed a low-cost scalable process for protecting carbon fiber against oxidation and burning. This method repre- sents a significant improvement over other anti-oxidation processes that have proven to be laborious, slow, and costly. "We are trying to add surface layers that can separate carbon fibers from oxygen, so that when exposed to high temperatures (up to 2,200 degrees Fahrenheit), the fibers won't burn," explains Yongfeng Lu, Lott Distinguished Professor, electrical and computer engineer- ing at the University of Nebraska's Center for Materials & Nanoscience. To remove carbon fiber's flammability, Lu's team devised a simple, single-step process that melts a salt that is chemically similar to table salt. After the salt crystals become liquid, titanium and chromium powders are added to the mix, along with the carbon fibers. This gives the high-temperature/oxidation resistance to the fibers. The process is fast and clean, making it attractive for widespread industrial use. Washington State University (WSU) WSU has created a CFRC that could eventu- ally replace the non-recyclable version for use in everything from airplane wings and wind turbines to sporting equipment. Developed under the direction of Jinwen Zhang, professor in WSU's School of Mechanical and Materials Engineering, this new composite material could easily be sub- stituted in existing manufacturing processes. WSU's CFRC team has developed a compos- ite material that uses epoxy vitrimer within the material instead of the traditional epoxy resin. This material is hard and durable, like an epoxy thermoset, but shows self-healing and malleable properties at high-temperatures. It is degradable in pressurized distilled water beginning at 160 degrees Celsius, and dis- solves into carbon fiber and compounds that can then be easily reused. l EDUCATION | CARBON FIBER Problem Solving a Dream Material University of Nebraska-Lincoln has developed a simple, inexpensive method for guarding carbon fiber against oxidation. Kathlyn Swantko, president of the FabricLink Network, created www.TheTechnicalCenter.com for Industry networking and marketing of specialty textiles, and www.fabricklink.com for consumer education involving everything fabric. Contact: kgswantko@fabriclink.com 32 • Textile Insight ~ November/December 2021 textileinsight.com For more information on "Carbon Fiber" research being conducted at the universities covered in this article, contact: Dr. Kuang-Ting Hsiao University of South Alabama kthsiao@southalabama.edu Dr. Yongfeng Lu University of Nebraska-Lincoln ylu2@unl.edu Dr. Jinwen Zhang Washington State University jwzhang@wsu.edu FabricLink.com TheTechnicalCenter.com "Thank you for all the support you have provided to Concept III over the years. You know how much we value it. Keep up the good work!" David Parkes President Concept III Textiles Why clients are excited about the benefits of The FabricLink Network Partnership Opportunities: Kristi Rummel kristi@rummelmedia.com 608.435.6220 Editorial Opportunities: Kathy Swantko kgswantko@fabricklink.com 818.345.7501 How will they find you, if you're not there? The FabricLink Network THE Networking / Education Search Engine for ALL Things Textile Related! FL-TTC-TI-2016-2_Layout 1 9/19/19 11:54 AM Page 1

