MDNews - Mid Penn

Innovations 2022

Issue link: https://viewer.e-digitaledition.com/i/1481285

Contents of this Issue

Navigation

Page 6 of 15

BY KYLE MIKLIK A NE W, AUTOMATED HE X APOD E X TERNAL RING FIX ATOR SYSTEM SHOWS PROMISE IN E XPANDING THE USE OF THIS WELL-ESTABLISHED INTERVENTION FOR LONG BONE DEFORMIT Y, MAKING TRE ATMENT E ASIER AND MORE CONSISTENT. FOR MORE THAN two decades, hexapod external ring fixators have been a reliable treatment option for congenital and traumatic joint and long bone deformity, loss and shortening. However, traditional devices require patients to make fine adjustments by hand multiple times a day over a period of months, limiting the number of eligible candidates. After approximately a decade of development, a novel, automated robotic fixation device, the Maxframe Autostrut system, is removing barriers to external fixation treatment and showing promising signs of improved patient outcomes. The system pairs DePuy Synthes' Maxframe external ring fixator with an automated adjustment system developed by OrthoSpin, eliminating the need for daily manual adjustments and allowing for more accurate treatment. J. Spence Reid, MD, chief of the Division of Orthopaedic Trauma at Penn State Health Milton S. Hershey Medical Center, board-certified orthopedic surgeon at Penn State Bone and Joint Institute, and professor and vice chair for education in the Department of Orthopaedics and Rehabilitation at Penn State College of Medicine, worked closely with the Maxframe Autostrut system development team as a consultant. He also became the first surgeon in the state of Pennsylvania, and one of the first in the nation, to use the treatment for patient care. DEVELOPMENT AND USE OF MAXFRAME AUTOSTRUT TECHNOLOGY Involving both software and hardware, Maxframe Autostrut technology required a complex development process. The hard- ware and software teams worked closely together, evolving the pieces of the puzzle in unison. While still in the early stages, the Maxframe Autostrut system has the potential to improve treat- ment outcomes and user experience for both patient and surgeon. "The entire range of things I could do with the [previous] Maxframe and its manually adjusted struts I can do with the Autostrut," Dr. Reid says. "With the original manual strut method, adjustments are made once or twice per day. The Autostrut makes adjustments 20 times per day. Because each increment of movement is smaller and the increments are spread out over a longer period, we believe the system will result in better biology for the bone and less pain for the patient." INCREASING ACCESS, IMPROVING EXPERIENCE Manually adjusted struts are not suitable for patients who lack the dexterity to make the adjustments or the visual acuity to read the measurement markers. These include children and some disabled and elderly patients. The Maxframe Autostrut alleviates many of these difficulties. Additionally, Dr. Reid notes, the traditional Maxframe has the potential for reliability issues. For instance, if the patient misses a manual adjustment or adjusts to the wrong setting, the surgeon might not know about it until reviewing data at the next appointment. "The Autostrut does its thing 20 times per day on the clock," Dr. Reid says. "Patients can also shower with it, and it's water- proof. So it's fairly user-friendly." CURRENT AND FUTURE RESEARCH NEEDS Small studies and initial clinical use of the Maxframe Autostrut system show strong promise. However, surgeons still have questions about the actual effect on pain levels, speed of bone growth, treatment time and user experience. "A large surgeon group using the Maxframe Autostrut will need to collaborate on the research to answer those questions," Dr. Reid says. "We require statistical significance, which means involving large numbers of patients." The FDA approved the use of the Maxframe Autostrut system in 2021, and it is currently available for clinical use. Dr. Reid and colleagues around the country are taking the lead in training other surgeons how to use the system, with courses held several times per year. " We're tr ying to get more surgeons to understa nd what the Ma x fra me Autostr ut system does a nd get them tra ined on the system," Dr. Reid says. " We're building a core of surgeons who a re involved in using the Ma x fra me Autostr ut so we ca n increase the numbers a nd perform the la rge studies that a re needed." ■ To learn more about Penn State Bone and Joint Institute, visit pennstatehealth.org/services-treatments/orthopaedics/bone- joint-institute or call 717-531-5638. The Maxframe Autostrut System: Increasing Accessibility, Improving Patient Outcomes for Bone Fracture and Deformity A physician adjusts the Maxframe Autostrut on a patient. M D N E W S . C O M /// M D N E W S M I D - P E N N ■ 2 0 2 2 0 7

Articles in this issue

Links on this page

Archives of this issue

view archives of MDNews - Mid Penn - Innovations 2022